Karatasi ya Titanium na Bamba
• Nyenzo za Karatasi ya Tittanium: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23
• Maumbo: Karatasi ya Kughushi, Karatasi ya Kuviringisha Baridi, Karatasi ya Kuviringisha Moto
• Kipimo:Unene: 0.3≤5mm, Upana: 400～3000mm, Urefu: ≤6000mm
• Masharti:Utengenezaji Moto na Uviringishaji Moto, Ulioviringishwa kwa Baridi, SuluhishoImeondolewa
• Viwango:ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 n.k.
| Aloi ya Titanium Nyenzo Jina la Kawaida | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0.20Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0.15Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
Karatasi ya Titanium na Bamba la Titanium:Tunatoa hasa karatasi safi ya titani ya darasa la Gr1, Gr2, Gr4;Kwa karatasi ya aloi ya titanium, Tunatoa zaidi Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 na darasa zingine, Zinatengenezwa kwa msingi wa sahani ya titan na rolling baridi zaidi;mchakato wa uzalishaji wa karatasi ya titani ni ngumu zaidi.Udhibiti wa deformation ni madhubuti zaidi katika mchakato wa rolling.Hiyo inaweza kukatwa kwa ukubwa tofauti kulingana na mahitaji ya mteja, kufupisha sana wakati wa kujifungua.
♦ Karatasi ya Titanium Muundo wa Kemikali ♦
| Daraja | Muundo wa kemikali, asilimia ya uzito (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Vipengele Vingine Max.kila mmoja | Vipengele Vingine Max.jumla | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.56.75 | 3.5 4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12 0.25 | - | 0.12 0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 3.5 | 2.0 3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12 0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04 0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 6.5 | 3.5 4.5 | - | - | - | - | 0.1 | 0.1 |
♦Karatasi ya Aloi ya TitanumTabia za kimwili ♦
| Daraja | Tabia za kimwili | |||||||
| Nguvu ya mkazo Dak | Nguvu ya mavunoKiwango cha chini (0.2%, punguzo) | Elongation katika 4D Kiwango cha chini (%) | Kupunguza eneo Kiwango cha chini (%) | Mtihani wa Bend (Radius ya Mandrel) | ||||
| ksi | MPa | ksi | MPa | ＜1.8mm Katika unene | 1.8-4.8mm Kwa unene | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 | 1.5T | 2.0T |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 | 2.5T | 3.0T |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 | 4.5T | 5.0T |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 | 2.5T | 3.0T |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 | 1.5T | 2.0T |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 | 2.0T | 2.5T |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 | 4.5T | 5.0T |
